What are an energy review and an energy baseline?
An energy review analyzes where and how energy is used and identifies significant energy uses (SEUs). The energy baseline is the reference period against which later improvement is compared.
Request a demoRenokta Ekibi ·

- 1. Data collectionEnergy sources and past consumption records are brought together.
- 2. Consumption splitUse is analyzed by equipment, line or building.
- 3. SEU selectionLarge-share or improvable uses are chosen.
- 4. Measurement planMeasurement points, frequency and owners are written down for SEUs.
- 5. BaselineData from a representative period is recorded as the reference.
An energy review is an analysis of an organization’s energy sources, use and consumption that shows which areas affect performance most. It identifies significant energy uses (SEUs) and provides the basis for the energy baseline against which improvement is compared. It sits at the center of the planning stage of ISO 50001.
What is done in an energy review?
The review answers three questions: which energy sources exist, where they are consumed and what influences that consumption. It starts with data collection and leads to analysis and a list of opportunities.
- Determining current and past energy use by source type, such as electricity, natural gas and fuel.
- Working out how consumption is split by equipment, line, building or process.
- Identifying variables that influence consumption, such as production, weather, occupancy and shifts.
- Estimating future energy use and opportunities for performance improvement.
A review is not done once and forgotten; it is updated at planned intervals or when a significant change occurs on site.
What is a significant energy use (SEU)?
An SEU is a use that accounts for a large share of consumption or has high potential for improvement. A compressor system, cooling, lighting or a production line can be an SEU, and the organization chooses using its own criteria.
You do not need to measure every use separately. The aim is to concentrate effort where consumption and opportunity are concentrated. Once SEUs are set, the relevant variables, current performance and responsible people are recorded as well.
What is the energy baseline and how is it set?
The energy baseline (EnB) is a reference value representing a defined period, used to compare changes in energy performance. Under the same conditions, it shows whether consumption has fallen relative to the baseline.
The period chosen should be long enough to reflect normal operation of the site, and is expected to cover seasonal effects and production swings. Energy data is collected throughout the period together with the variables that affect consumption.
The baseline may need adjusting when a new line is added or the production pattern changes. The reason and date of such a change should be recorded. For the relationship between baseline and performance indicator, the ISO 50006 guidance can be consulted.
Why is a measurement plan needed?
A measurement plan puts in writing which quantity is measured where, how often and by which method. This way, reliable and consistent data is collected for the review and baseline.
- Quantities to measure: energy (kWh), power and, where needed, flow and temperature.
- Measurement points: the main meter, sub-meters assigned to SEUs and supporting sensors.
- Measurement frequency: the level of detail needed for decisions, which may be hourly or finer.
- Owners, calibration and verification method, and what to do when data is missing.
ISO 50015 is the related guidance standard on measurement and verification; it can be consulted when you want to demonstrate that measurement is reliable.
When is a sub-meter needed?
A sub-meter is needed when the consumption of an SEU cannot be separated from main meter data. A single bill value does not show the share of a line, shift or machine; a sub-meter measures that share separately.
Putting a meter on every machine is costly and often unnecessary. Some uses can be estimated from operating hours and rated power. Focusing on SEUs first and widening the scope based on early data is a more measured path. For sub-metering details, see our article on sub-meter energy monitoring and the one on the role of measurement in energy management.
Conclusion: base planning on data
An energy review, SEUs and a baseline are only meaningful with reliable measurement data; without it these steps turn into guesswork. Renokta helps turn the measurement plan into an infrastructure that collects meter and sensor data, and a needs discovery session can define the scope together. This article makes no promise of conformity or certification.
Frequently asked questions
- What is an energy review?
- It is an analysis of energy sources, use and consumption that identifies significant energy uses and improvement opportunities. It underpins the planning stage of ISO 50001.
- What does SEU mean?
- SEU stands for significant energy use. It refers to areas with a large share of consumption or high improvement potential, selected using the organization’s own criteria.
- How is the energy baseline chosen?
- A period is chosen that represents normal operation and is long enough to cover seasonal and production variation. Variables affecting consumption are recorded over the same period.
- Is a sub-meter needed for every machine?
- No. It is more sensible to focus on significant energy uses first. Some uses can be estimated from operating hours and power; the site structure determines what is needed.
- Is the energy baseline fixed?
- No. It can be adjusted when, for example, a new line is added or the production pattern changes. The reason and date should be recorded.
