What is energy management?
Energy management is a metering and monitoring practice that measures the electricity use of a building or plant by usage group with sub-meters, current sensors and smart plugs, compares use with a target, manages it with schedules and produces regular reports. It also gives a measurement base for energy management system work such as ISO 50001.
How does it work?
Sensors placed on the main panel and sub-groups measure power, and a gateway sends the data to the platform. The platform gathers usage groups and the target in one place.
- A main panel current sensor, smart plugs and thermostats produce data.
- A gateway carries the data to the platform.
- The platform compares power with the target and runs schedule rules.
- A warning is sent as the target nears; a monthly report is produced.
Usage groups are defined up front; adding a new group extends existing measurements and reports without breaking them. The report shows the target and the actual in the same table.
What quantities are measured?
- Current power and daily consumption: the basic monitoring data.
- Power by usage group: shows the split between production, heating and cooling, lighting, office and IT.
- Standby load: reveals what stays on outside working hours.
- Monthly target used: shows how close you are to the target.
- Thermostat and schedule status: tracks whether heating and cooling schedules are applied.
Which method or technology should you choose?
- Sub-meter (Modbus or pulse output): gives detailed, dependable readings; installation needs work inside the panel.
- Clamp-on current sensor: quick to fit without opening the panel; it does not measure voltage, so power is calculated from assumed values.
- Smart plug: monitors and can switch single devices and office sockets; covers only loads plugged into it.
- Smart thermostat: manages heating and cooling schedules; comfort needs should be considered separately.
Who is it for?
- Factories and plants with many usage groups
- Office buildings and business centres
- Store chains and multi-branch businesses
- Organisations building a metering base for ISO 50001 work
- Managers who want consumption split by usage group
How do alarms and notifications work?
When power nears the target, or consumption outside working hours is higher than expected, the platform raises a warning. It goes to chosen channels such as e-mail or message, and is acknowledged and recorded.
If a link drops, the point is flagged as missing data. Gateways that keep a local buffer can send the data once the link returns; this depends on the device and configuration.
Integration with existing systems
Data from existing meters, analysers, building management systems or SCADA can be taken in over Modbus, MQTT or an API. Reports can be passed to other systems. Integration is adapted to the need, with scope settled during the survey.
Data privacy and security
The system collects consumption and device status and is not meant to track individuals. Users are authorised by role. ISO 50001 conformity is not an automatic result of this solution. Data protection and compliance assessments are handled with the company own privacy notice and advisers.
Installation process and what a quote needs
A survey lists the main panel, sub-panels and usage groups. In a pilot a few groups are measured and the target and report are set up; then other groups follow.
For a quote, share the number of usage groups, the building or plant area, existing meters and the report type you want through the contact form.
For live control, see energy SCADA and automation; for catching deviations in consumption, see energy analysis and anomaly detection.
Highlights
Power split by usage group
Groups such as production, climate control, lighting and office are measured and compared separately.
Power target tracking
A power or monthly consumption target is set and a warning is sent as it nears.
Standby load detection
Sockets and devices left on outside working hours become visible.
Schedule rules
Smart plugs and thermostats are moved to night and weekend mode by timed rules.
Monthly energy report
Per-group consumption, the target and events are collected in a regular report.
Measurement base for ISO 50001 work
Measured data gives a record base that can support energy management system work.



