Skip to content
RenoktaRenokta

What Is Predictive Maintenance? Starting With Sensors

Predictive maintenance watches data such as vibration and temperature to spot a failure before it happens. Preventive maintenance follows the calendar; predictive follows machine condition.

Request a demo

Renokta Ekibi ·

A live process chart on the touch panel beside an injection moulding machine.
Predictive maintenance flow
MeasureMonitorAlarmPlannedaction
  1. 1. MeasureVibration, temperature and current are read by sensors.
  2. 2. MonitorData is compared with the normal operating level.
  3. 3. AlarmThe maintenance team is alerted when a deviation crosses the threshold.
  4. 4. Planned actionMaintenance is done at a suitable time before failure.

Predictive maintenance is the practice of continuously monitoring data such as vibration, temperature and current so that a failure can be noticed before it happens. Maintenance is done according to the machine's real condition rather than the calendar. This reduces unnecessary work and helps avoid unplanned stops.

How do the maintenance approaches differ?

Maintenance is usually described by three approaches, and the difference is when and based on what the intervention takes place.

  • Reactive maintenance: the machine is fixed after it breaks. It is the simplest method but causes unplanned stops.
  • Preventive maintenance: done on a calendar or by running hours. It is planned, but work may be done even when the machine is healthy.
  • Predictive maintenance: done according to the measured condition of the machine. Work is planned when a real sign of wear appears.

Which sensors should you start with?

Three basic measurements are enough to start: vibration, temperature and current. Each gives an early sign of a different kind of failure.

  • Vibration: can reveal mechanical problems such as bearing wear, imbalance and misalignment.
  • Temperature: can reveal overload, poor lubrication or rising friction.
  • Current: can reveal changes in motor load and unexpected operating conditions.

Which measurement catches which fault varies by machine. Choose the critical machines first, then decide on the sensors that suit them.

How does predictive maintenance work?

The system first learns the machine's normal operating level and then watches for deviations from it. When a deviation crosses a set threshold, an alarm is raised and the maintenance team is alerted.

At the beginning, simple threshold rules are often enough. As data builds up, trend analysis and more advanced methods can be added, but the first step is to collect and see the data.

Which machines is it suited to?

Priority goes to machines whose failure stops production, whose repair is costly or whose spare parts are hard to get. Pumps, motors, fans, compressors and gearboxes are common examples.

You do not need sensors on every machine. It is more sensible to begin with the few machines whose failure has the greatest impact.

How does the maintenance team use the system?

An alarm should tell the maintenance team what happened and where. The notification should name the machine, the measurement and the threshold it crossed.

The team assesses the alarm, inspects the machine on site if needed, and schedules the work at a time that suits the production plan. Keeping a record of what was done helps with later alarms.

What are the limits of predictive maintenance?

Predictive maintenance does not warn of every failure. Some faults develop suddenly and leave no clear early sign in the measured quantities.

A badly placed sensor or a wrongly set threshold can cause both missed failures and needless alarms. For that reason thresholds should be reviewed after installation and compared with failure records.

How do you move from preventive to predictive?

The shift is gradual, not sudden. While the existing preventive schedule continues, sensor data starts to be monitored on the critical machines.

As the data proves to reflect the machine's condition reliably, some calendar-based tasks can be spaced out. That decision should be made together with failure records and the maintenance team's experience; data supports the decision rather than making it.

How do you get started with predictive maintenance?

The best route is a small pilot. A few critical machines are chosen, sensors are fitted, data is watched on a platform, and thresholds are tuned to the machine's behavior over a few weeks.

  • List the critical machines and their past failure records.
  • Choose the right measurement for each machine.
  • Install the sensors and confirm that data is flowing.
  • Observe normal operation and set thresholds.
  • Write down in advance who does what when an alarm arrives.

Conclusion

Predictive maintenance moves maintenance to the right time by reading the machine's own data. You do not need a large investment to start; a few critical machines and three basic measurements are enough. To discuss where your plant could begin, see our smart factory and MES solution page or contact us for a needs discovery session.

Frequently asked questions

How does predictive differ from preventive maintenance?
Preventive maintenance follows a calendar or running hours. Predictive maintenance is planned from the measured condition of the machine and reduces unnecessary work.
Which sensors does predictive maintenance need?
Vibration, temperature and current sensors are a good start. The choice depends on the machine being monitored and the expected type of failure.
Does every machine need predictive maintenance?
No. It is more sensible to start with critical machines whose failure stops production or is costly to repair, and widen the scope later.
Is artificial intelligence required for predictive maintenance?
No. Simple threshold rules and trend monitoring are often enough at the start. More advanced analysis can be added as data accumulates.
Can sensors be fitted to older machines?
Yes. Vibration and temperature sensors can be mounted externally, and current can be measured without changing the machine.

Let's plan the right solution for you, together.

Request a demo