Skip to content
RenoktaRenokta

How do people counting sensors work?

People counters use infrared beams, depth (ToF), stereo vision, thermal sensing or video analytics. The right choice depends on door width, ceiling height, lighting and privacy requirements.

Request a demo

Renokta Ekibi ·

Ticket gates with digital displays and passengers passing through at a train station.
From people count to decision
EntrancesurveyTechnologychoicePilot andhand countEntry andexit dataOccupancyand action
  1. 1. Entrance surveyDoor width, ceiling height and lighting conditions are noted.
  2. 2. Technology choiceA sensor type suited to the space is chosen and mounted.
  3. 3. Pilot and hand countA few hours of manual counting are compared with sensor output.
  4. 4. Entry and exit dataHourly entry and exit counts are sent to the platform.
  5. 5. Occupancy and actionOccupancy becomes staffing, lighting and HVAC plans.

People counting sensors automatically count everyone passing an entrance using infrared beams, depth (ToF), stereo vision, thermal sensing or video analytics. The right technology depends on door width, ceiling height, lighting and privacy requirements, and the hourly entry and exit data then feeds occupancy and staffing decisions.

What types of people counting sensors are there?

There are five main technologies, each with different strengths and weaknesses.

  • Infrared beam: counts each time a beam across the doorway is broken. Cheap and simple, but struggles to separate people walking side by side.
  • Time of flight (ToF): mounted on the ceiling, it builds a depth map from the return time of light. It counts shapes without recognising anyone and works in the dark.
  • Stereo vision: two lenses produce a three-dimensional picture. Useful for high ceilings and wide entrances.
  • Thermal sensing: counts body heat traces. Low resolution, but unaffected by light.
  • Video analytics: offers rich data such as dwell time and heat maps, but processes images, so privacy and data protection duties are heavier.

What should you ask before choosing a sensor?

Entrance dimensions, lighting and data transmission decide the choice, and these five questions pin them down.

  • How wide is the entrance and how high is the ceiling?
  • Is there glare or strong natural light?
  • How will data be transmitted: wired or wireless?
  • Should staff be excluded from the count?
  • Is anonymous counting, without stored images, enough?

How do you verify counting accuracy?

A pilot at the real entrance is the most reliable test. Manufacturer accuracy figures come from laboratory conditions. Counting by hand for a few hours and comparing it with the sensor output is the best way to confirm mounting height and angle. If the error is large, move the sensor and measure again.

What can you do with the counting data?

Hourly entries and exits give occupancy. Busy hours become staff rosters; quiet hours become lighting and HVAC schedules. In shops, dividing sales by entries gives the conversion rate.

Does people counting put privacy at risk?

Anonymous counters do not produce personal identity data, but the data flow should still be reviewed with your legal advisor under data protection law. Details are on the Renokta people counting solution page.

Frequently asked questions

Do people counting sensors work in the dark?
Time of flight (ToF), infrared beam and thermal sensors work in the dark. ToF builds a depth map from the return time of light, so it does not depend on ambient lighting.
Which people counting technology is the most accurate?
No single technology is the most accurate for every site. The choice depends on door width, ceiling height and lighting, and a pilot at the real entrance shows the true accuracy.
Does people counting raise data protection issues?
Anonymous counters do not produce personal identity data, while video analytics that processes images carries a heavier load. In every case the data flow should be reviewed with your legal advisor.
How do I test counting accuracy?
Count by hand at the real entrance for a few hours and compare the result with the sensor output. If the error is large, adjust mounting height and angle and measure again.
What decisions does people counting data support?
Occupancy informs staff rosters and lighting and HVAC schedules. In shops, dividing sales by entries gives the conversion rate.

Let's plan the right solution for you, together.

Request a demo