Skip to content
RenoktaRenokta

What Is MES? How It Differs From ERP (ISA-95 Layers)

An MES (Manufacturing Execution System) tracks and manages production on the shop floor in real time. ERP plans the work; MES shows how that plan actually plays out.

Request a demo

Renokta Ekibi ·

A live process chart on the touch panel beside an injection moulding machine.
Where MES sits in ISA-95
Machineand sensorPLC andSCADAMESERP
  1. 1. Machine and sensorRaw data comes from the physical process.
  2. 2. PLC and SCADAControl the machine and show it to the operator.
  3. 3. MESTracks, records and manages production in real time.
  4. 4. ERPPlans orders, stock and finance.

An MES (Manufacturing Execution System) is software that tracks, records and manages production on the shop floor in real time. It shows how work orders move through machines and where stops and scrap occur. ERP plans what to produce, while MES follows how production actually happens.

What does an MES do?

An MES closes the gap between plan and reality. Everything that happens on the production floor is gathered in the MES at a level of detail ERP cannot see.

  • Tracks which machine a work order is on, when, and in what state.
  • Records stops together with their reasons.
  • Counts output and scrap in real time.
  • Calculates performance indicators such as OEE automatically.
  • Keeps batch and traceability records.

What is the difference between MES and ERP?

ERP manages a company's resources and business processes, while MES manages the live operation of the production floor. One does not replace the other; they complement each other.

  • Focus: ERP covers orders, stock, purchasing and finance; MES covers production execution.
  • Time scale: ERP usually works in days and weeks; MES works in seconds and minutes.
  • Data source: ERP relies mostly on manual or document entry; MES takes data directly from machines and operators.
  • Question: ERP answers "What should we make?", MES answers "What is happening right now?".

What are the ISA-95 layers?

ISA-95 is an international standard that describes how to separate enterprise systems from production control systems and how to connect them. It is usually explained in five levels.

  • Level 0: the physical process; machines, sensors and actuators.
  • Level 1: sensing and control; PLCs and similar controllers.
  • Level 2: monitoring and supervision; SCADA and operator screens.
  • Level 3: manufacturing operations management; this is where MES sits.
  • Level 4: business planning; this is where ERP sits.

This model shows that MES is a bridge between ERP and the control systems on the floor.

When does a company need an MES?

Consider an MES when you cannot tell the difference between planned and actual production. The need becomes clear if the reasons for stops are unknown, the source of scrap cannot be found, or reports are prepared by hand and arrive late.

MES also matters in industries that require batch traceability. Every company's needs differ, so first decide which problem you want to solve.

How do you start an MES project?

The short path is to begin with a pilot covering one line or a few machines rather than the whole plant. First, run status and production count are taken automatically from the machines, and then stop-reason entry is added.

If the pilot creates value, the scope grows. This leaves time for operators to get used to the system and for the system to adapt to the floor.

How do MES, OEE and traceability relate?

OEE is one of the most common MES outputs. Because the MES already collects stops, production counts and defect data, it can show the three components live without any manual calculation.

Traceability rests on the same data. If you record which machine, shift and conditions produced a batch, the affected products can be found quickly when a problem appears.

Are MES and SCADA the same thing?

No. SCADA focuses on monitoring and supervising machines and the process, while MES covers production management such as work orders, batches and efficiency. SCADA is often the layer that feeds data to the MES.

Conclusion

MES is the layer that shows in real time how the production ERP planned is carried out on the floor. It does not replace ERP; it works alongside it. To assess what data your plant could start with, see our smart factory and MES solution page or talk to us about a needs discovery session.

Frequently asked questions

Does MES replace ERP?
No. ERP manages planning, stock and finance, while MES manages the production floor in real time. They complement each other and exchange data.
What is ISA-95?
ISA-95 is an international standard that defines the boundary and data exchange between enterprise systems and production control systems.
What data does an MES collect?
It collects shop-floor production data such as machine run status, output quantity, stop reasons, scrap and batch information.
Does an MES need to integrate with ERP?
It is not mandatory but is usually useful. Work orders can pass from ERP to MES, and completed quantities can pass from MES back to ERP.
Can small companies use an MES?
Yes. You can start with a pilot on one line or a few machines and widen the scope as value becomes clear.

Let's plan the right solution for you, together.

Request a demo